Atsushi MYOJOYAMA Tsuyoshi YAMAMOTO
We propose new lossless medical image compression method based on hierarchical sorting technique. Hierarchical sorting is a technique to achieve high compression ratio by detecting the regions where image pattern varies abruptly and sorting pixel order by its value to increase predictability. In this method, we can control sorting accuracy along with size and complexity. As the result, we can reduce the sizes of the permutation-tables and reuse the tables to other image regions. Comparison using experimental implementation of this method shows better performance for medical image set measured by X-ray CT and MRI instruments where similar sub-block patterns appear frequently. This technique applies quad-tree division method to divide an image to blocks in order to support progressive decoding and fast preview of large images.
Toshio HIGASHI Tsuyoshi YAMAMOTO Tsutomu ISHIKAWA Takuya FUJII Haruhisa SODA Minoru YAMADA
We have measured the temperature dependence of the gain characteristics in 1.3-µm AlGaInAs/InP strained multiple-quantum-well (MQW) semiconductor lasers using Hakki-Paoli method. By measuring the temperature dependences of the peak gain value and the gain peak wavelength, we evaluated the temperature dependences of the threshold current and the oscillation wavelength, respectively. The small temperature dependence of the threshold current in AlGaInAs/InP lasers is caused by the small temperature dependence of the transparency current density, which is represented by the characteristic temperature TJtr of 116 K. In AlGaInAs/InP high T0 lasers, the temperature dependence of the oscillation wavelength is slightly larger than that in GaInAsP/InP lasers because of the larger temperature dependence of bandgap wavelength 0.55 nm/K.
Tatsuki KAWAGUCHI Yoshinori DOBASHI Tsuyoshi YAMAMOTO
Controlling fluid simulation is one of the important research topics in computer graphics. In this paper, we focus on controlling the simulation of cumuliform cloud formation. Using a previously proposed method for controlling cloud simulation the convergence speed is very slow; therefore, it takes a long time before the clouds form the desired shapes. We improved the method and accelerated the convergence by introducing a new mechanism for controlling the amount of water vapor added. We demonstrate the effectiveness of the proposed method by several examples.
Toshio HIGASHI Tsuyoshi YAMAMOTO Tsutomu ISHIKAWA Takuya FUJII Haruhisa SODA Minoru YAMADA
We have measured the temperature dependence of the gain characteristics in 1.3-µm AlGaInAs/InP strained multiple-quantum-well (MQW) semiconductor lasers using Hakki-Paoli method. By measuring the temperature dependences of the peak gain value and the gain peak wavelength, we evaluated the temperature dependences of the threshold current and the oscillation wavelength, respectively. The small temperature dependence of the threshold current in AlGaInAs/InP lasers is caused by the small temperature dependence of the transparency current density, which is represented by the characteristic temperature TJtr of 116 K. In AlGaInAs/InP high T0 lasers, the temperature dependence of the oscillation wavelength is slightly larger than that in GaInAsP/InP lasers because of the larger temperature dependence of bandgap wavelength 0.55 nm/K.
Takuro FUJII Koji TAKEDA Erina KANNO Koichi HASEBE Hidetaka NISHI Tsuyoshi YAMAMOTO Takaaki KAKITSUKA Shinji MATSUO
We have developed membrane distributed Bragg reflector (DBR) lasers on thermally oxidized Si substrate (SiO2/Si substrate) to evaluate the parameters of the on-Si lasers we have been developing. The lasers have InGaAsP-based multi-quantum wells (MQWs) grown on InP substrate. We used direct bonding to transfer this active epitaxial layer to SiO2/Si substrate, followed by epitaxial growth of InP to fabricate a buried-heterostructure (BH) on Si. The lateral p-i-n structure was formed by thermal diffusion of Zn and ion implantation of Si. For the purpose of evaluating laser parameters such as internal quantum efficiency and internal loss, we fabricated long-cavity lasers that have 200- to 600-µm-long active regions. The fabricated DBR lasers exhibit threshold currents of 1.7, 2.1, 2.8, and 3.7mA for active-region lengths of 200, 300, 400, and 600µm, respectively. The differential quantum efficiency also depends on active-region length. In addition, the laser characteristics depend on the distance between active region and p-doped region. We evaluated the internal loss to be 10.2cm-1 and internal quantum efficiency to be 32.4% with appropriate doping profile.
Shigeo URUSHIDANI Masayasu YAMAGUCHI Tsuyoshi YAMAMOTO
Design and evaluation of a high-performance switch architecture for free-space photonic switching systems is described. The switch is constructed of 22 switching elements and employs special multistage interconnection patterns. The connection setup algorithm and the control procedure at the switching elements are based on a "rerouting algorithm."" Performance analysis shows that the blocking probability of the switch is easily controlled by increasing the number of switching stages. Example implementations of this switch are shown in which birefringent plates, polarization controllers, etc. are used.
Xiaoxiong XING Yoshinori DOBASHI Tsuyoshi YAMAMOTO Yosuke KATSURA Ken ANJYO
We present an algorithm for efficient rendering of animated hair under a dynamic, low-frequency lighting environment. We use spherical harmonics (SH) to represent the environmental light. The transmittances between a point on a hair strand and the light sources are also represented by SH functions. Then, a convolution of SH functions and the scattering function of a hair strand is precomputed. This allows us to efficiently compute the intensity at a point on the hair. However, the computation of the transmittance is very time-consuming. We address this problem by using a voxel-based approach: the transmittance is computed by using a voxelized hair model. We further accelerate the computation by sampling the voxels. By using our method, we can render a hair model consisting of tens of thousands of hair strands at interactive frame rates.
Kittima MEKHABUNCHAKIJ Tsuyoshi YAMAMOTO Yoshinao AOKI
This paper describes an experimental system for designing three-dimensional solid objects through three-view orthographic drawings, using automatic three-dimensional interpretation in cooperating with a set of interactive drawing-oriented design utilities. In the design process based on the system approach, an object is viewed as being consisting of several volumetric instances, each of which is further composed a number of simple subvolumes. In the system, whereas the automatic interpretation is employed to construct the instances from their orthographic projections, the design utilities are provided to allow modifications of a solid-object model being composed of the constructed instances. Once a solid-object model is created from a drawing containing the projections of an instance, modifications on the drawing can be performed for addition of new instances into the existing solid-object model, and changes and deletion of the instances existing in the model. Being aimed at a two-dimensional interface for the Constructive Solid Geometry, or CSG method, the system provides the user with design interaction procedures which let the user manipulate the projections of the instances in terms of two-dimensional graphical primitives, such as straight lines, arcs, and circles, obtain and display a solid object constructed from the projections being designed. In addition, more complex three-dimensional object shapes can be achieved using this alternative approach after the interpretation concept.
Yuto MATSUNAGA Tetsuya KOJIMA Naofumi AOKI Yoshinori DOBASHI Tsuyoshi YAMAMOTO
We have proposed a novel concept of a digital watermarking technique for music data that focuses on the use of sound synthesis and sound effect techniques. This paper describes the details of our proposed technique that employs the distortion effect, one of the most common sound effects frequently utilized especially for guitar and bass instruments. This paper describes the experimental results of evaluating the resistance of the proposed technique against some basic malicious attacks utilizing MP3 coding, tempo alteration, pitch alteration, and high-pass filtering. It is demonstrated that the proposed technique potentially has appropriate resistance against such attacks except for the high-pass filtering attack. A technique for increasing the resistance against the high-pass filtering attack is also supplementarily discussed.
Koji TERADA Seimi SASAKI Kazuhiro TANAKA Tsuyoshi YAMAMOTO Tadashi IKEUCHI Kazunori MIURA Mitsuhiro YANO
This letter describes our DFB-LD module for use in WDM optical access networks. We realized an isolator-free DFB-LD module with a thermo-electric cooler in aim of stabilizing the emission wavelength for WDM systems. Silicon waferboard technology was employed to achieve simple assembly and small size of the module. This small size contributed to low TEC power. Our fabricated module demonstrated low-noise and stable emission wavelength characteristics under 156 Mbit/s pseudo random modulation.
We describe an algorithm for efficiently compositing partial images generated during parallel volume rendering on a distributed memory parallel computer. In this object space partitioning algorithm, each PE is assigned to several subvolumes where each subvolume has a corresponding local frame buffer. After volume rendering is performed independently for each subvolume, the partial images stored in the local frame buffers are combined to generate a complete image. During this compositing process, the communication of partial image data between the PEs is kept minimal by assigning PEs to subvolumes in an interleaved manner. This assignment makes possible a reduction in communication in the axis direction in which there is the most communication. Experimental results indicate that a 9% to 35% reduction in the total rendering time can be attained with no additional data structures and no memory overhead.
Ban GUO Tsuyoshi YAMAMOTO Yoshinao AOKI
To employ Computer Graphics (CG) technology in the production of CG holograms or similar applications where the generation of consecutive pictures with rotated viewing directions is demanded takes a lot of time and money. This paper presents a two-pass surface rendering method for fast creating such animated pictures from a single view image structure. Instead of generating display data for a single picture, the first pass program constructs a Position Oriented (PO) frame buffer that contains the information of control points on every order of visible surfaces. A display program of second pass manipulates the frame buffer structure to generate surface rendered pictures with spatial and perspective transforms. Experiments proved the method is effective to create high quality surface rendered images with rotation capability. Various usuful facilities for CAD visualization have also been developed within the technique. The improvements on memory consumption and picture quality are also discussed in this paper.
Seiji KUMAZAWA Tsuyoshi YAMAMOTO Yoshinori DOBASHI
In functional brain images obtained by analyzing higher human brain functions using functional magnetic resonance imaging (fMRI), one serious problem is that these images depict false activation areas (artifacts) resulting from image-to-image physiological movements of subject during fMRI data acquisition. In order to truly detect functional activation areas, it is necessary to eliminate the effects of physiological movements of subject (i.e., gross head motion, pulsatile blood and cerebrospinal fluid (CSF) flow) from fMRI time series data. In this paper, we propose a method for eliminating artifacts due to not only rigid-body motion such as gross head motion, but also non-rigid-body motion like the deformation caused by the pulsatile blood and CSF flow. The proposed method estimates subject movements by using gradient methods which can detect subpixel optical flow. Our method estimates the subject movements on a "pixel-by-pixel" basis, and achieves the accurate estimation of both rigid-body and non-rigid-body motion. The artifacts are reduced by correction based on the estimated movements. Therefore, brain activation areas are accurately detected in functional brain images. We demonstrate that our method is valid by applying it to real fMRI data and that it can improve the detection of brain activation areas.
Hideaki TAMORI Naofumi AOKI Tsuyoshi YAMAMOTO
This paper suggests that a watermarking technique based on the number theoretic transform (NTT) may effectively be employed for detecting alterations on lossless digital master images. Due to its fragility, the NTT-based technique is sensitive to detecting alterations, compared with that based on the discrete Fourier transform (DFT).
Hidenobu MURANAKA Tomoyuki KATO Shun OKADA Tokuharu KIMURA Yu TANAKA Tsuyoshi YAMAMOTO Isaac SACKEY Gregor RONNIGER Robert ELSCHNER Carsten SCHMIDT-LANGHORST Colja SCHUBERT Takeshi HOSHIDA
One of cost-effective ways to increase the transmission capacity of current standard wavelength division multiplexing (WDM) transmission systems is to use a wavelength band other than the C-band to transmit in multi-band. We proposed the concept of multi-band system using wavelength conversion, which can simultaneously process signals over a wide wavelength range. All-optical wavelength conversion could be used to convert C-band WDM signals into other bands in a highly nonlinear fiber (HNLF) by four-wave mixing and allow to simultaneously transmit multiple WDM signals including other than the C-band, with only C-band transceivers. Wavelength conversion has been reported for various nonlinear waveguide materials other than HNLF. In such nonlinear materials, we noticed the possibility of wideband transmission by dispersion-tailored silicon-on-insulator (SOI) waveguides. Based on the CMOS process has high accuracy, it is expected that the chromatic dispersion fluctuation could be reduced in mass production. As a first step in the investigation of the broadness of wavelength conversion using SOI-based waveguides, we designed and fabricated dispersion-tailored 12 strip waveguides provided with an edge coupler at both ends. Each of the 12 waveguides having different widths and lengths and is connected to fibers via lensed fibers or by lenses. In order to characterize each waveguide, the pump-probe experimental setup was constructed using a tunable light source as pump and an unmodulated 96-ch C-band WDM test signal. Using this setup, we evaluate insertion loss, input power dependence, conversion bandwidth and conversion efficiency. We confirmed C-band test signal was converted to the S-band and the L-band using the same silicon waveguide with 3dB conversion bandwidth over 100-nm. Furthermore, an increased design tolerance of at least 90nm was confirmed for C-to-S conversion by shortening the waveguide length. It is confirmed that the wavelength converters using the nonlinear waveguide has sufficiently wide conversion bandwidth to enhance the multi-band WDM transmission system.
We present a volume rendering algorithm which renders images at approximately two to seven times the speed of a conventional ray caster with almost no visible loss of image quality. This algorithm traverses the volume data in object order and renders the image by performing ray casting for the pixels within the footprint of the voxel (i.e., rectangular prism) being processed. The proposed algorithm supports the rendering of both single and multiple isosurfaces with arbitrary opacity values. While the projection approach to volume rendering is not new, we present an algorithm specifically designed for the perspective projection, evaluate its rendering speed for both single and multiple isosurfaces with arbitrary opacity values, and examine how efficiently it uses cache memory.
Kazuhito FURUYA Kenji KURISHIMA Tsuyoshi YAMAMOTO
An electron-wave device consisting of a hot electron transistor structure with a transversal potential grating in a base region is proposed. A reduced transit time and extremely small charging times provide significant potential for high-speed operation.
Hideaki TAMORI Tsuyoshi YAMAMOTO
We propose an asymmetric fragile watermarking technique that uses a number theoretic transform (NTT). Signature data is extracted from a watermarked image by determining correlation functions that are computed using the NTT. The effectiveness of the proposed method is evaluated by simulated detection of altering.
Kittima MEKHABUNCHAKIJ Tsuyoshi YAMAMOTO Yoshinao AOKI
The use of the Constructive Solid Geometry (CSG) model has been considered in several computer-aided design systems for recent years, since its concept of powerful and multiple operations on basic object shapes to create more complex ones is intuitively easy to understand. Based on the CSG concept and a guiding principle of scene analysis, an algorithm for interpreting three-view drawings is described in this paper. In a certain process, the 3D interpretation works on local recognition to detect possible subparts of which orthographic patterns are defined in the 2D description of a part. In the subsequent process, which examines all possible solutions to the given drawing until finding one that meets some goal criteria, the combinatorial operators are applied to the possible subparts. Through those repeated processes, the final solution can be obtained in terms of consistent subparts in a CSG tree, including additional information about solids and cavities.